Theoretically, at least, everything is installed correctly and is ready to run. teTeX is a very large software package. As with any complex software package, you'll want to start by learning teTeX slowly, instead of being overwhelmed by its complexity.
At the same time, we want the software to do something useful. So instead of watching TeX typeset
``Hello, World!''as Professor Knuth suggests, we'll produce a couple of teTeX's own documents in order to test it.
You should be logged in as
root the first few times you run
teTeX. If you aren't, Metafont may not be able to create the
necessary directories for its fonts. The
includes an option to make the font directories world-writable, but if
you're working on a multi-user system, security considerations may
make this option impractical or undesirable.
In either instance, if you don't have the appropriate permissions to
write to the directories where the fonts are stored, Metafont will
complain loudly because it can't make the directories. You won't see
any output because you have a bunch of zero-length font characters.
This is no problem. Simply log out, re-login as
repeat the offending operation.
The nice thing about teTeX is that, if you blow it, no real harm is done. It's not like a compiler, where, say, you will trash the root partition if a pointer goes astray. What, you haven't read the teTeX manual yet? Of course you haven't. It's still in the distribution, in source code form, waiting to be output.
So, without further delay, you will want to read the teTeX manual. It's located in the directory
The LaTeX source for the manual is called
.tex extension is used for both TeX and LaTeX files. Some
editors, like Emacs, can tell the difference.) There is also a file
TETEXDOC.dvi included with the distribution, which you might
want to keep in a safe place---say, another directory ---in case you
want to test your
.dvi drivers later. With that out of the
latex TETEXDOC.texLaTeX will print several warnings. The first,
LaTeX Warning: Label(s) may have changed. Rerun to get the cross-references right.is standard. It's common to build a document's Table of Contents by LaTeXing the document twice. So, repeat the command. The other warnings can be safely ignored. They simply are informing you that some of the FTP paths mentioned in the documentation are too wide for their alloted spaces. Sections Paragraph styles and dimensions and Tolerances describe horizontal spacing in more detail.
teTeX will have generated several files from
The one that we're interested in is
TETEXDOC.dvi. This is the
device-independent output which you can send either to the screen or
the printer. If you're running teTeX under the X Windows System, you
can preview the document with
For the present, let's assume that you have a HP LaserJet II. You would give the command
dvilj2 TETEXDOC.dviwhich writes a PCL output file from
soft fonts which will be downloaded to the LaserJet. This is
not a feature of TeX or LaTeX, but a feature provided by
.dvi drivers provide features that
are relevant to the devices they support.
dvilj2 tries to
fill the font requests which were made in the original LaTeX document
with the the closest equivalents available on the system. In the case
of a plain text document like
TETEXDOC.tex, there isn't much
difficulty. All of the fonts requested by
be generated by
metafont, which is automatically invoked by
dvilj2, if the fonts aren't already present. (If you're
dvilj2 for the first time, the program may need to
generate all of the fonts.) There are several options that control
font generation via
dvilj2. They're outlined in the manual
page. At this point, you shouldn't need to operate
directly. If you do, then something has gone awry with your
installation. All of the
.dvi drivers will invoke
metafont directly via the kpathsea path-searching
library---the discussion of which is beyond the scope of this
document---and you don't need to do any more work with
metafont for the present---all of the
sources for the Computer Modern font library are provided.
You can print
TETEXDOC.lj with the command
lpr TETEXDOC.ljYou may also need to install a printer filter that understands PCL.
The nine-page teTeX Guide provides some useful information for further configuring your system, some of which I have mentioned, much that this document doesn't cover.
Some of the information in the next section I haven't been able to test, because I have a non-Postscript HP Deskjet 400 color ink jet printer connected to the computer's parallel port. However, not owning a Postscript printer is no barrier to printing text and graphics from your text documents. Ghostscript is available in most Linux distributions and it could already be installed on your system.