Welcome to HowTo! The premier Linux information resource center.
____________________________________

H HOWTO 's 

Contrib
(Submitted Documentation)
FAQ
(Frequently Asked Questions)
Links
(Links page)
IRC Information
(IRC Page)
ISPs
(Linux Friendly ISPs)
Book Store
(Books through Amazon.com)
RFC Index
(Request For Comments)
Man Pages
(Linux Manual Pages)
LUGs
(Linux User Group Listing)

18. Removable drives

All SCSI drives should work if the controller is supported, including optical (MO), WORM, floptical, Bernoulli, Zip, Jaz, SyQuest, PD, and others.

• Panasonic MO (combines a CD-ROM drive and an optical removable disk). You have to set a switch when configuring the kernel to get both part work at the same time.
• Parallel port Zip drives
  ftp://gear.torque.net/pub/
• Parallel port Avatar Shark-250
  http://www.torque.net/parport/

Removable drives work like hard disks and floppies, just fdisk/mkfs and mount the disks. Linux provides drive locking if your drives support it. mtools can also be used if the disks are in MS-DOS format.

CD-R drives require special software to work. Read the CD-R Mini-HOWTO.

Linux supports both 512 and 1024 bytes/sector disks. Starting with kernel 2.1.32 Linux also supports 2048 bytes/sector. A patch to kernel 2.0.30 is available at http://liniere.gen.u-tokyo.ac.jp/2048.html.

The 2048 bytes/sector support is needed for

• Fujitsu magneto-optical disk drives M2513

Starting with pre-patch-2.0.31-3 IDE/ATAPI internal Zip drives, flopticals and PD's are supported.

• LS-120 floptical
• PD-CD