Welcome to HowTo! The premier Linux information resource center.
____________________________________

H HOWTO 's 

Contrib
(Submitted Documentation)
FAQ
(Frequently Asked Questions)
Links
(Links page)
IRC Information
(IRC Page)
ISPs
(Linux Friendly ISPs)
Book Store
(Books through Amazon.com)
RFC Index
(Request For Comments)
Man Pages
(Linux Manual Pages)
LUGs
(Linux User Group Listing)

7. Controllers (hard drive)

Linux will work with standard IDE, MFM and RLL controllers. When using MFM/RLL controllers it is important to use ext2fs and the bad block checking options when formatting the disk.

Enhanced IDE (EIDE) interfaces are supported. With up to two IDE interfaces and up to four hard drives and/or CD-ROM drives. Linux will detect these EIDE interfaces:

• CMD-640 (Support for buggy interfaces in kernel 2.2)
• DTC 2278D
• FGI/Holtek HT-6560B VLB (Support for secondary interface in kernel 2.2)
• RZ1000 (Support for buggy interfaces in kernel 2.2)
• Triton I (82371FB) (with busmaster DMA)
• Triton II (82371SB) (with busmaster DMA)

ESDI controllers that emulate the ST-506 (MFM/RLL/IDE) interface will also work. The bad block checking comment also applies to these controllers.

Generic 8 bit XT controllers also work.

Starting with pre-patch-2.0.31-3 IDE/ATAPI is provided.

7.1 Alpha, Beta drivers

• UMC 8672 interfaces (experimental in kernel 2.2)
• Promise DC4030VL caching interface card (experimental support in kernel 2.2)